Since 31 January 2020, the UK is officially no longer part of the EU but is considered a third country to the union although EU legislation will still apply to the country until the end of 2020. Although Northern Ireland is part of the UK, the region will remain under EU VAT legislation when it comes to the supply of goods also after 1 January 2021. The EU Commission has proposed an amendment to the VAT Directive creating a new country code for Northern Ireland to be used in tax identification numbers of Northern Irish companies.
An overall obligation for EU taxpayers to use and perform supplies under an EU-approved tax ID number exists. Thus, applying EU law to supplies performed to/from Northern Ireland demands an EU-compatible VAT identification number. Currently, EU Member States use a prefix country code following the ISO 3166-1 standard that assigns the country code “GB” to the UK and Northern Ireland.
From 1 January 2021, the indiscriminate use of the “GB” prefix in VAT numbers may pose a problem for supplies of goods to/from Northern Ireland. From that date, intra-community supplies and acquisitions of goods to/from Northern Ireland will remain in the scope of the EU VAT law. Consequently, Northern Irish taxpayers must hold a specific EU VAT number to be identified as such under the European rules. Provided that the country code “GB” will be used by the UK and assigned according to British legislation, the EU Commission has proposed a new country code “XI” to be attributed as a prefix of Northern Irish tax ID numbers.
A valid EU tax identification performs many roles, such as ensuring (or facilitating) the correct tax and customs treatment for intra-community supplies. The VIES platform, that runs the EU VAT Information Exchange System, is an example of the importance the EU gives to valid tax ID numbers. To ensure parties to a transaction can check each other’s tax ID numbers and are eligible to exemptions on intra-community supplies, the EU has established the VIES system, which will likely be the first EU mechanism directly affected by the creation of the new Northern Irish country code.
Such a proposal from the EU Commission may impact Member States’ systems. Upon adoption, the new Directive will require Member States to quickly adjust their apparatus to process “XI” invoices from January 2021. Countries operating some degree of continuous transaction controls, such as Italy, Hungary, and Spain, may be expected to update their platforms to comply with the amendment.
If passed, the proposal will impact taxpayers’ accounting and ERP systems which will need to process and recognize the “XI” country code in issued and received invoices as a Northern Irish indicator. Moreover, many systems allow the use of user-assigned country codes in customized transaction flows. User-assigned country codes are ISO codes that are freely assigned by users and used at their discretion, for example flows between supported and non-supported countries within an ERP system. So far, “XI” has been a user-assigned country code. Consequently, the proposal may force many IT departments to change internal policies regulating the use of user-assigned country codes.
Tax departments must also be aware of the tax treatment of “XI” invoices, given that EU VAT law won’t apply to supplies of services performed to/from Northern Ireland, but only to supplies of goods. Consequently, companies must create internal flows to deter the use or validation of the “XI” country code in supplies of services if unaccompanied by a valid “GB” country code.
The Council of the European Union is expected to deliberate about the proposal next on 9 September.
Talk to our tax experts for immediate help or keep up to date with the changing VAT compliance landscape, download Trends: Continuous Global VAT Compliance and follow us on LinkedIn and Twitter to stay ahead of regulatory news and other updates.
CLASS – short for Classification Information System – is the new single point access search facility from the European Commission. It provides access to tariff classification data of goods entering or leaving the EU and is the latest step in developing an integrated approach to managing customs information and procedures. When goods are declared at an EU entry point, they must be classified and declared on customs transit documents either according to the Combined Nomenclature (“CN”), or a Member State’s domestic classification. CLASS provides easy access to the correct rate of customs duty and details of any non-tariff measures that apply. It also provides:
Using CLASS should save businesses significant time in obtaining the required customs information without having to rely on multiple resources across different locations, formats, and languages. Time saving means reduced administration and cost as well as swifter supply chain decision making and ultimately a more efficient goods shipping process.
By coincidence, the UK government almost simultaneously to the launch of CLASS announced the blueprint for the UK Global Tariff (“UKGT”). UKGT is the UK’s replacement for the EU’s Common External Tariff once the Brexit transition period has ended (currently expected to be 31 December 2020). UKGT, which applies duty values in UK pounds instead of Euros, should make it simpler and cheaper for businesses to import goods into the UK from overseas. It features a reduction and simplification of over 6,000 tariff categories and rates (e.g. rounding rates to whole percentages), and a lower tariff regime than the EU’s Common External Tariff, including total elimination of tariffs on a wide range of goods. The goal is to ease customs administration for business, expand consumer choice, and enhance competitiveness for UK businesses trading globally. A controversial measure is the abandonment of the EU Measuring table, which removes over 13,000 tariff variations on food products that the government views as unnecessary. Remaining tariffs will be targeted to support specific strategic industries such as agriculture, automotive and fishing, where the UK is considered competitive, and are also intended to enhance competitiveness and the uptake of “green” energies and associated products.
The simplifications heralded by UKGT may offset the anticipated increase in customs administration costs to UK businesses post-Brexit. What is less clear is whether the strategic amendments undertaken to import tariffs will harm UK businesses as their products may not be subject to commensurate low rates on entry to EU countries, especially if there is a “No Deal” outcome to ongoing UK-EU trade negotiations. What is clear, however, is that all these changes should prompt any businesses seeking to import/export goods to/from the UK from next year to review their supply chains and re-examine the impact on their sales prices and profit margins. Since import VAT is calculated on duty-inclusive prices, there may also be consequences in import VAT accounting and cash flow.
To learn more about what we believe the future holds, download Trends: Continuous Global VAT Compliance and follow us on LinkedIn and Twitter to keep up to date with regulatory news and other updates.
On 22 June, the joint Ministerial Decision that sets forth the myDATA framework was published. The decision specifies, among other things, the scope of application and applicable exemptions, the data to be transmitted, transmission methods and procedures, applicable deadlines and how transactions should be characterized.
Starting from January 2021, the required data must be reported to the myDATA platform in real-time. For information relevant to the year 2020, taxpayers have been awarded more breathing room: until the end of this year, the required data can be reported within 5 days after the issuance of an invoice, but not later than the 20th of the following month.
The implementation of myDATA will be performed in a phased manner, with ERP-based reporting of outbound and inbound data with their respective classifications starting from 1 October 2020. If a myDATA accredited e-invoicing service provider (according to the rules of the new framework) is used for e-invoicing, the reporting to myDATA through a service provider is possible from 20 July 2020.
To encourage businesses to adopt e-invoicing, the Ministry of Finance, through a draft bill published on 19 June, provided a number of incentives for businesses to use e-invoicing facilitated through service providers until the end of 2022.
The incentives provided are:
Based on these recent developments, it is clear that the Greek government wishes to promote the adoption of e-invoicing in Greece but does not yet go so far as to make it mandatory. A decision specifying the details of the e-invoicing scheme is expected to be published by the IAPR in the very near future.
For companies operating in Turkey, 2019 was an eventful year for tax regulatory change and in particular, e-invoicing reform. Since it was first introduced in 2012, the e-invoicing mandate has grown, and companies are having to adapt in order to comply with requirements in 2020 and beyond. Turkey’s digital transformation and e-invoicing landscape continues to evolve.
According to the General Communique on the Tax Procedure Law (General Communique), more taxpayers now need to comply with the mandatory e-invoicing framework. The General Communique published on 19 October 2019 covers other e-documents such as e-arşiv, e-delivery note, e-self-employment receipts, e-producer receipts, e-tickets, e-note of expenses, e-Insurance Commission Expense Documents, e-Insurance Policies, eDocument of Currency Exchange, and e-Bank Receipts.
From 1 July 2020, taxpayers with a gross sales revenue of TL 5 million or above in fiscal years 2018 or 2019 must switch to the e-invoice system. Taxpayers who meet these requirements in 2020 or later, should switch to the e-invoice system at the beginning of the seventh month of the following accounting year.
Turkey’s tax authority has set some sector-based parameters for businesses operating in Turkey. Companies licensed by the Turkish Energy Market Regulatory Authority, middlemen or fruits or vegetable traders, online service providers facilitating online trade, importers and dealers are some of the taxpayers also required to switch to e-invoices, irrespective of their turnover.
E-arsiv fatura documents B2C transactions. But also in case the transacting counterparty is not registered with the TRA for e-invoicing. Similar to e-invoice, the e-arşiv invoice, became mandatory for intermediary service providers; online advertisers; and intermediary online advertisers who switched to the system from 1 January 2020.
Taxpayers not in scope for e-invoice and e-arşiv must issue e-arşiv invoices through the Turkish Revenue Administration´s portal. That is if the total amount of an invoice issued, including taxes, exceeds:
Turkey’s Government continues to tackle its VAT gap through digital transformation. By taking greater control of reporting and requiring more granular tax detail. So, businesses operating in Turkey need powerful e-invoicing strategies to comply with the growing demands for digital tax transformation.
Sovos has more than a decade of experience keeping clients up to date with e-invoicing mandates all over the world.
With two weeks to go until the first mandatory phase of the Indian e-invoicing reform go live, the GST Council slammed the breaks. Or at least, bring it to a significant temporary standstill of 6 months. As a result, the India e-invoicing reform is now postponed until 1 October 2020
Following a long list of complaints — both from the private sector toward the GST Council, as well as from the GST Council vis-á-vis the IT infrastructure provider that powers the GST Network, Infosys — the council decided to revisit the 1 April go-live in a recent meeting held today, Saturday 14 March.
The GST council made a number of important decisions, including most notably:
The decisions made in the 39th meeting of the GST Council will require either that the legislative framework (Notifications) published in early December be amended or entirely replaced with new ones to reflect the new reality. However, it wouldn’t be unreasonable to expect even further delays to the roll out of this reform. This given to the recent economic volatility triggered by the ongoing pandemic. Only once both global markets as well as the underlying technical platforms of the GST control reform seem to stabilize will the post-October timeline of the roll out be fully certain.
Anyone predicting Italy’s clearance model e-invoicing system, FatturaPA, would undergo further reform would be right. Agenzia delle Entrate – AdE, the Italian tax authority, has issued new technical specifications and schemas for Italian B2B and B2G e-invoices. But – what do these changes really mean? And what impact do they have on business processes?
Over recent weeks, three updates have been introduced:
The inclusion of withholding taxes (especially social contributions) is one of the new content requirements for the B2B and B2G XML formats. There are also 12 new document types (including self-billed invoices and integration documents) and a further 17 new nature of transactions options (such as reasons for exemptions and reverse charges).
These content updates now require Italian companies to have a deeper understanding of the Italian tax system. The changes impact the moment taxpayers classify their supplies: under the current model, Italian companies don’t have to worry about this until the submission of their VAT returns but under the new schema this classification will be performed in real-time. These updates are likely to impact business processes. They are a necessary next step in paving the way ahead of the upcoming introduction of pre-completed VAT returns, an initiative largely considered to eliminate administrative burden and make life easier for most Italian businesses.
In parallel, further changes resulting from the new versions of the FatturaPA formats have a technical impact on businesses, demanding IT implementation readiness. Among the technical updates are the inclusion of additional fields, length of content, permitted characters, shifting from optional to mandatory field fulfillment and vice-versa, and how often a field can be repeated.
The new technical specifications also introduced new validations that will be performed by the Sistema di Interscambio – SDI, the Italian government-platform responsible for clearance of e-invoices. Most of the new validations check the content of the e-invoice against document types and the indicated nature of the transactions and require taxpayers to eventually be able to understand, process and react accordingly to new errors.
The SDI platform will start processing B2B invoices in the new FatturaPA format from 4 May 2020, but the AdE will enforce use of the new schema on 1 October 2020, triggering new validations and errors only after this date as per the Provvedimento from 28 February 2020. Different deadlines apply to B2G invoices, unless of course the AdE publishes new transition rules for these invoices before that date. The enforcement of the new schema for B2G invoices is set to begin on 1 May 2020.
In practice, the effect of these deadlines mean that while the schemas for B2B and B2G invoices are indeed the same from a technical perspective, taxpayers will must be ready for different deadlines and be prepared to work with two different invoice schemas from 1 May until 4 May.
To find out more about what we believe the future holds, download Trends in Continuous VAT Compliance.
In Turkey, the Revenue Administration (TRA) published the long-awaited e-Delivery Note Application Manual. The manual clarifies how the electronic delivery process will work in addition to answering frequently asked questions. It addresses the application as well as its scope and structure, outlines important scenarios and provides clarity for companies who are unclear about the adoption of e-delivery notes.
The e-delivery note is the electronic version of the “delivery note,” currently printed on paper. As a result, it allows the TRA to regularly monitor the movements of delivered merchandise in the electronic environment.
Electronic delivery has the same legal qualifications as the delivery note but is issued, forwarded, retained, and submitted digitally.
According to the circular published by the TRA at the end of February, taxpayers in scope of the e-delivery note application are;
Taxpayers engaged in fruit and vegetable trade as brokers or merchants completed their transitions of January 1, 2020. Other taxpayers covered by the mandate must be ready by July 1, 2020.
Taxpayers deemed to be risky or at low levels of tax compliance by the TRA must complete their transition to the e-delivery note application within three months after being notified.
Besides explaining the basic concepts, the manual also details the previously announced scenarios providing answers to many areas that were confusing for taxpayers.
The main scenarios are:
In addition, other topics covered include:
Full details on the Turkey E-Delivery Application Manual are available in Turkish from the TRA e-Document website.
Sovos has more than a decade of experience keeping clients up to date with e-invoicing mandates all over the world.
A keystone of HMRC’s Making Tax Digital for VAT (MTD) regime is that the transfer and exchange of data between what HMRC define as “functional compatible software” must be digital whenever that data remains a component of the business’s digital records. This is to maintain a wholly digitally linked audit trail between systems.
When the MTD legislation was introduced, HMRC offered businesses a soft landing period of up to one year to incorporate digital links from the date they became obliged to adopt MTD. During this period, businesses wouldn’t be liable for non-compliance penalties. In practice, this meant:
Due to feedback on the difficulty in applying the new rules, HMRC recently announced it would consider written requests for an extension on a discretionary case-by-case basis where there are genuine reasons for non-compliance (for example, those operating large corporate groups with disparate legacy systems). However, it’s clear an extension will only be granted in exceptional circumstances and businesses will need to have:
After review, HMRC will either reject the request or grant a written Direction extending that “soft landing” period by up to 12 months.
Sovos provides VAT reporting technology that is fully compliant with Making Tax Digital (MTD), including digital link. Talk to an expert.
The upcoming tax reform in Greece is expected to manifest itself in three continuous transaction control (CTC) initiatives.
Earlier this month, new technical specifications were published for the online connection of cash registers with the government portal. From June 2020, all cash registers currently used in Greece must be updated to meet the new technical specifications (available in Greek) to be able to connect and transmit their transaction data to the government portal.
The technical specifications regulate two aspects:
These specifications are complementary to those published in late 2018, which mainly regulated the security and certification requirements of the new generation cash registers. This latest development is further proof that the Greek government is committed to moving forward with the CTC plans it initially outlined two years ago.
Sovos has more than a decade of experience keeping clients up to date with e-invoicing mandates all over the world.
Certification of e-invoice service providers is an important first step and milestone ahead of the implementation of e-invoicing in Greece. The Greek Government has now defined the regulatory framework for e-invoice service providers, their obligations, and a set of requirements needed to certify their invoicing software. Find out what you need to know about the accreditation scheme for e-invoicing service providers in Greece.
E-invoice service providers are entities the taxpayer authorises to issue invoices on their behalf electronically for B2B in addition to B2C transactions. They’re responsible for issuing, the authenticity and integrity, and the transmission of transaction data to the tax authority in real-time. Other outsourced functions include e-invoice delivery to the buyer directly and archiving on behalf of the issuer.
The service provider’s software must meet a number of requirements. It must for example be able to guarantee integrity and authenticity of the invoice according to the SHA-1 algorithm, provide real-time connection with the customer’s software, and make the invoice available to the customer in electronic (or, upon request, in paper) form. Any software which meets these criteria recieves a “Suitability Permit”, which is valid for five years.
Service providers must be a Greek registered entity or permanently established in Greece. They must also meet certain technical, security and financial criteria and the invoice data must be stored within the EU. Other obligations also include making a user manual available to the customer; notifying the tax authority of each outsourcing contract they have entered into; and addressing privacy-related matters.
The transmission method to the myDATA will be the myDATA REST API and the format of the e-invoice exchanged between the parties is based on the EN norm, as defined by law just a few days ago. The myDATA website will publish any details and further legislation.
Through this Decision, the Greek Government is introducing the long-awaited secondary legislation, as mandated in the budget law 2020 earlier this year. Precisely how these provisions will work together with the myDATA scheme, scheduled to be fully operational on 1 April 2020, is still to be defined by the authorities. However, Greece requires further legislation, as well as a formal derogation decision from Brussels. This is if the Greek government wishes to mandate e-invoicing in the country. As such a reform would deviate from principles laid out in the EU VAT Directive.
Need more information on the accreditation scheme for e-invoicing in Greece? Sovos has more than a decade of experience keeping clients up to date with e-invoicing mandates all over the world.
Back in June this year, many heads were turned when the French Minister of Public Accounts and Action, Gérald Darmanin, went on record stating that the French Government has the intention of making e-invoicing mandatory also for B2B transactions. Now it seems that the Government – spearheaded on this topic by Minister Darmanin as well as by the Minister of Finance Bruno Le Maire – has moved from word to action. The French Finance Bill for 2020, formally presented after the meeting of the Council of Ministers on 27 September, codifies the plan to extend the B2G e-invoicing obligation in force today to cover also B2B e-invoices.
In just three short paragraphs, the draft finance law outlines the major principles for the budding reform. While much is left to be clarified by later decrees, art. 56 of the Finance Bill introduces the main rule that electronic form for invoices will be mandatory and that, as a result, paper invoices will no longer be permitted. It also introduces language that means that e-invoices most likely also will be cleared by the tax authority, or otherwise have the data transmitted to the tax authority to enable control of the VAT on the invoice. France will effectively, and not surprisingly, be joining the ranks of other countries such as Mexico, Turkey, Italy and Brazil, who have implemented measures to tackle its VAT gap through real-time VAT control mechanisms.
The timeline of the roll-out of the mandate will, just like the roll-out of the B2G mandate currently in force, be scheduled in stages; gradually becoming applicable for companies depending on the size of the business. The first stage of the mandate will begin on 1 January 2023, and according to the bill the entire economy should be up-and-running under the new e-invoicing system no later than 1 January 2025.
The Government also states that it, during the course of next year, will present a report to parliament, the Assemblée Nationale, presenting how the reform will be carried out as well as the underlying analysis of which method and what regulations constitute the most appropriate technical, legal and operational solution, particularly as regards the clearance/transmission of invoice data to the tax administration.
In addition to the analysis and drafting of both laws and reports that the Government announced, it’s also clear that one more critical element needs to be covered before the reform becomes a reality: Brussels.
Ever since Italy went down this same path and became the first EU country to introduce mandatory clearance B2B e-invoicing, many parallels have been drawn between the two countries. They share a similar situation in terms of VAT gap and IT infrastructures, which have made many experts (rightly) assume that France would follow down the path Italy set out. However, in order to lawfully do so, Italy had to seek and obtain permission from the EU Council to deviate from the provisions of the EU VAT Directive (2006/112/EC). The French Government has acknowledged that it will need to do the same.
Want to learn more? For a continued and in-depth analysis of the French e-invoicing reform and its challenges, please join a webinar hosted by Christiaan van der Valk, e-invoicing expert and VP of Strategy at Sovos, on this topic on 3 October.
Inscrivez-vous ici si vous désirez rejoindre le webinaire de Christiaan van der Valk le 3 Octobre.
Last month, we made some predictions on how the outcome of the recent elections would impact the agenda of the Independent Authority of Public Revenues (IAPR) on the envisaged e-invoicing and e-reporting reform. It looks as if the newly elected government is fully in-line with the IAPR agenda to implement e-reporting and bookkeeping (mandatory e-invoicing is still in the agenda but at a later stage) and its proposed model, as announced yesterday by the minister of Finance during parliamentary discussions.
The IAPR has made great progress towards the implementation of the e-reporting scheme (named “Epopis”) by publishing, just yesterday, the technical specifications and schemas for the transmission of data to the IAPR platform. The IAPR reporting platform now has a name, “myDATA,” meaning Digital Accounting and Tax Application. It is worth noting that no legal documentation has been made available yet.
Having made available enough information on the process and the technical details, the IAPR has launched a public consultation to receive inputs from businesses and interested stakeholders on the proposed e-reporting scheme that will be open until 6 September 2019.
Italy has been at the forefront of B2G e-invoicing in Europe ever since the central e-invoicing platform SDI (Sistema di Interscambio) was rolled out and made mandatory for all suppliers to the public sector in 2014.
While a number of its European neighbours are slowly catching up, Italy is continuing to improve the integration of new technologies with the public administration’s processes. Its latest move is to make e-orders mandatory in public procurement. By leveraging the successful use of the public administrations’ Purchase Orders Routing Node platform (Nodo di Smistamento degli Ordini, or NSO) in the Emilia-Romagna region, Italy is now extending the functionality throughout the country.
As of 1 October 2019, all purchase orders from the Italian National Health System (Servizio Sanitario Nazionale, or SSN) must be delivered to and received by suppliers through the NSO platform. The suppliers affected by the mandate will be required to receive e-orders from public entities; the public administration will not proceed with the liquidation and payment of invoices issued by non-compliant companies. It is noteworthy that the mandate covers all purchase orders made by entities associated with the SSN, including office supplies and electronics, and not just health-related products.
In addition to mandatory receipt of e-orders, suppliers will also be able to send messages to the public administration. In cases where suppliers and the public administration have previously agreed, the supplying company may send pre-filled e-orders to the public administration buyer, which will confirm or reject the proposed supply.
Moreover, foreign suppliers must also comply with this mandate. The NSO mandate will have some impact on e-invoicing for Italian public administrations seeing as certain e-order data must be included in the e-invoices that are transmitted through the SDI.
The NSO system is built upon the existing SDI infrastructure, and as a result, the communication with the NSO requires similar channel accreditation as the SDI. Suppliers and intermediaries already performing the transmission of messages through the SDI platform are required to comply with complementary accreditation requirements, which are yet to be published. Furthermore, the technical specifications show that PEPPOL intermediaries may interact with the NSO platform through an Access Point service accredited with the NSO.
Learn how Sovos helps companies handle e-invoicing and other mandates in Italy and all over the world. To find out more about what we believe the future holds, download the Sovos eBook on Trends: e-invoicing compliance.
Anyone who has been closely following SAF-T announcements over the past few years may be forgiven for thinking that it all seems rather like Groundhog Day. Commencement dates and reporting requirements have been announced and subsequently amended and re-announced as the respective countries re-evaluate their needs and the readiness of companies to provide the data in the prescribed formats.
Earlier this month Poland announced that the changes planned for 1 July 2019, requiring mandatory filing of SAF-T information and the corresponding withdrawal of the requirement to submit a periodic VAT return, have now been deferred to January 2020.
Also this month, Romania announced plans to become the eighth country to introduce SAF-T by introducing requirements for transactional reporting by the end of 2020.
So, what is SAF-T, what is the latest position for countries which have introduced legislation and what lies ahead?
The Standard Audit File for Tax (SAF-T) was developed by the Organisation for Economic Co-operation and Development (OECD) with the aim of producing a standardised format for electronic exchange of accounting data from organisations to their national tax authority and external auditors.
The two key principles behind SAF-T are that;
In 2005 the OECD released the first version of the SAF-T schema which provides details of what should be included in a SAF-T xml reporting file and how that data should be formatted and structured. The original schema was based on the general ledger and details of invoices and payments, together with customer and supplier master files. A second version of the SAF-T schema was released in 2010 to incorporate information about Inventory and Fixed Assets.
What the OECD have not defined, and what remains the responsibility for the tax administration in each country to decide, is the exact format in which the data is to be captured and when and how it is required to be sent to the tax administration.
What has emerged from those countries which have adopted SAF-T are three broad approaches;
In some cases, the mandate starts with a requirement to produce data on request and evolves through to periodic submissions.
There are currently seven countries which have introduced legislation enforcing SAF-T requirements.
Portugal was one of the first adopters and Portuguese entities have been required to extract data into the SAF-T file format (based on version 1 of the OECD SAF-T schema) since 2008 on an annual basis. Further extensions to collect sales invoice data and other documents on a monthly basis followed in 2013.
Luxembourg introduced the requirement to extract data in the relevant format in 2011. It only applies to Luxembourg resident companies subject to the local chart of accounts and is only required to be submitted when requested by the tax authority.
France introduced a SAF-T requirement in 2014, using a proprietary format rather than the OECD standard SAF-T schema, requiring files to be submitted in txt format. It is currently only required to be filed on demand when requested by the French tax authority.
Austria introduced SAF-T in 2009 and is currently only required on demand when requested by the tax authority.
Possibly the most significant implementor of SAF-T to date, with large companies having had to file monthly JPK (Jednolity Plik Kontrolny) returns since 2016.
Lithuania introduced the requirement to file the SAF-T based i.MAS on a phased basis, starting with the largest organisations in 2016 and working towards mandating SAF-T for all businesses by 2020. The i.MAS comprises three parts, i.SAF reporting of sales and purchase invoices on a monthly basis, i.VAZ reporting of transport/consignment documents and the i.SAF-T accounting transaction report, which is only required when requested by the tax authority.
SAF-T has been in place on a voluntary basis since 2017 and there are proposals to mandate it, on an ‘on-demand’ basis from January 2020.
Countries which are receiving regular, transactional level details under SAF-T may look to reduce the periodic VAT return requirements. This is because the need to prepare a VAT return summarising the details which the tax authority already receives on a transactional basis can be seen as unnecessary duplication.
Poland is proposing that SAF-T data submissions will displace the need for filing a VAT return from January 2020.
Romania is proposing a phased transition to filing of transactional data from 2020, starting with large organisations, with a reduction in the VAT returns which are required to be filed.
To find out more about what we believe the future holds, follow us on LinkedIn and Twitter to keep up-to-date with regulatory news and other updates.
Split payments is one of the methods that European countries with a considerable VAT gap use to tackle it. Across the EU, the VAT gap in the EU in 2016 was reported to be €147.1bn.
Poland introduced voluntary VAT split payments in July 2018. Since then around 25% of taxpayers have adopted this payment method. This equates to 400,000 out of 1.6 million taxpayers currently active on the Polish market. However, only 9% of the total amount of VAT has been paid using this mechanism since last year.
The VAT split payment mechanism means that the amount of commodities or supplies for consideration is being paid to the taxable person into one account, while the VAT amount charged in the underline transaction is deposited in a different bank account designated for this purpose.
On May 16, 2019 the Ministry of Finance published draft legislation which intends to introduce mandatory split payments from September 1, 2019. Poland received temporary approval, valid until 2022, from the European Commission on February 18, 2019, subject to introducing some limitations to the mandate. Consequently, split payments will apply to (and substitute) reverse charge transactions and those with purchaser tax liability; it will also apply to 150 selected goods and services, such as car parts, coal, fuel, waste and some electronic equipment. In addition, to comply with the mandate, the value of the transaction must exceed the threshold of PLN 15,000 (approximately €3,500). The Ministry of Finance reported that the selected industries are those where state tax administration observes the highest tax avoidance.
Since July 2018, taxpayers complained that the way in which split payment is regulated influences their financial liquidity. The bank account to which VAT is paid belongs to the taxpayer, however, its freedom to spend this money is currently limited to paying VAT. With the planned amendments, taxpayers will be able to pay other state charges from the VAT accounts, such as social security charges and other tax liabilities including income tax, excise and customs duties.
Split payments will also apply to non-resident companies subject to VAT in Poland, who are settling transactions by means of bank transfers, and are otherwise in scope of the mandate as per the general rules. Based on the Ministry of Finance estimates, there are around 550 such companies, 150 of which do not even have a local bank account. Complying with the local split payment regime will be more of a challenge for these companies.
Sanctions for non-compliance may affect both the supplier and buyer. Suppliers may be charged with 100% of the VAT due for not including a mandatory statement on the invoice which is subject to split payment (in Polish: “mechanizm podzielonej płatności”). Buyers may be penalised in the same way for not paying VAT to the VAT account, alternatively they may be deprived of the right for tax deduction.
Split payment was either introduced or is being considered in three other European countries. Italy and Romania both introduced a split payment mandate for certain businesses from 2015 and 2018 respectively. In the UK, public consultations were held throughout 2018 with a view to introducing split payments. From April 2019 Romania withdrew mandatory split payments, following the November 2018 order of the European Commission which concluded that the mandate is disproportionate. It will now maintain a voluntary split payment regime.
Read more about split payments across Europe, download Trends: e-invoicing compliance and join our LinkedIn Group to keep up to date with regulatory news and other updates.
For more information see this overview about e-invoicing in Poland or VAT Compliance in Poland.
On 15 February 2019, Portugal published Decree-Law 28/2019 regarding the processing, archiving and dematerialisation of invoices and other tax related documents including:
The decree aims to consolidate rules and to promote the adoption of electronic means of dealing with tax documentation and archiving. It also aims to eliminate tax fraud by tightening controls through the identification of invoicing software, identifying where invoicing terminals are located, the mandatory obligation to include a unique document code (UUID) in the tax document and, finally, identifying the location of the transaction.
According to the Decree-Law, invoices (paper or electronic) must be processed using certified invoicing software, which must, amongst other things, complete the invoice’s content in line with the VAT law. Simplified invoices (issued for less than €100 Euro) can, however, be processed by “other electronic invoicing means” such as cash machines. The Decree-Law also regulates contingency situations where the invoice must be based on pre-printed documents.
Having to use invoicing software that has been certified by the tax authority is not new in Portugal. However, the changes in the new Decree-Law mean that more taxpayers must now comply with the obligation as the mandate threshold has reduced. Previously it only affected companies (with a permanent establishment in Portugal) with a revenue in the previous year of €100K. It now includes companies with a revenue of over €75K (applicable during 2019) and reduces to €50K from 2020.
The decree also mandates that from 1 January 2020, invoices must carry a unique invoice code (UUID) following the government’s requirements. The code will also be represented as a QR code on printed invoices. Both requirements are new and software providers will have to adapt their solutions in the future to meet these new legal requirements.
Another new requirement set by the Decree-Law is that taxpayers must communicate to the tax authority the invoice series used by each establishment before issuing any invoice. The tax authority will assign to each series a code that must be included in the new mandatory UUID. While not the same, a similar requirement applies in many other countries, more specifically, in countries that have introduced a clearance model. In fact, Latin American countries with a clearance system often require taxpayers to either request prior invoice ranges from the tax authority, or to have an invoice series authorised by the tax authority, or to have the numeration done directly by the tax authority in connection with the clearance process. A good example of the first scenario is in Chile or Colombia, where taxpayers must request prior authorisation of an invoice range by the Chilean tax authority. An example of the second process is Mexico, where the invoice is numbered by the state agent that intervenes in the clearance process. However, such a requirement is new in the EU context, demonstrating once more that Europe is drawing inspiration from Latin America’s success in closing their VAT gap.
When it comes to guaranteeing the integrity and authenticity of invoices, it is worth noting that the decree deviates from the Directive 2010/45/EU as the possibility to use business controls provides a reliable audit trail (hereinafter BCAT) as a method of guaranteeing integrity and authenticity is expressly limited to paper-based invoices only. Furthermore, such controls must be properly documented.
For electronic invoices (ie those that are issued and received electronically) integrity and authenticity are guaranteed when one of the following methods is used: qualified e-signature; qualified e-seal in accordance with e-IDAS Regulation; or electronic data interexchange (EDI) with secure and documented processes to ensure integrity and authenticity. Taxpayers have until 31 December 2020 to migrate to the new methods of guaranteeing integrity and authenticity for electronic invoices.
Portugal is implementing its own vision when it comes to guarantees of integrity and authenticity putting itself, once more, closer to Latin American clearance countries where such guarantees are only achieved by digitally signing e-invoices. The distinction between methods (BCAT for paper invoices vs. e-signatures and EDI for electronic invoices) is an explicit preference of e-signatures and EDI over BCAT methods as the most efficient way to guarantee e-invoice integrity and authenticity.
In addition to the new invoicing requirements, the Decree-Law imposes taxpayers with new obligations to notify the tax authority with additional information. This includes:
Taxpayers who have already carried out activities subject to VAT must present the above-mentioned information by 30 June 2019.
To keep up to date with regulatory, news and other updates join our LinkedIn Group
More than six months ago the Greek authorities announced their intention to introduce mandatory e-invoicing and e-bookkeeping rules, and enough information is now available to assess what the proposed rules will mean for Greece.
Although formal legislation has yet to be published, it’s expected the new e-invoicing measures by the Independent Public Revenue Authority, the Greek authority responsible for all tax matters (AADE; in Greek, “ΑΑΔΕ”), will be mandated by January 2020.
The Director of AADE recently stated that e-invoicing is incomplete without e-reporting, so the proposed rules must encompass both areas of tax compliance. By January 2020 the goal is for reporting to occur in real-time at the same time as the invoice is issued. The new rules would make e-invoicing and e-reporting mandatory, with a real-time connection from the invoicing system (by transmission of all relevant invoice data) to the electronic system (TaxisNet) of the Greek tax authorities.
So far, no real action has been taken regarding the implementation of the new e-invoicing system, e.g. the e-invoicing process, e-invoice format requirements and the software systems to connect to the tax authority have not yet been defined. However, the Ministry of Finance recently published a Decision establishing certification requirements and describing the certification process and responsibilities for e-invoicing service providers, who would be able to perform services of issuance, delivery and archiving on behalf of the taxable person.
By comparison, more progress has been made for implementing real-time reporting. AADE has published the technical specifications for transmission of invoice data – however, the scope of the reporting framework covers other tax as well as invoice data – e.g. income tax – to the government portal (TaxisNet) and invoice data will need to be reported on a daily basis (instead of periodically as currently). These technical specifications apply to the connection from the so-called Greek “electronic fiscal devices” – which is the most commonly used compliant method for issuing (and ensuring integrity and authenticity of) B2C invoices in Greece – to TaxisNet, as well as the data transmission software operated by e-invoicing service providers.
For B2B invoices, whose integrity and authenticity can be guaranteed by any method of the EU Directive, no technical specifications have been published yet. Further clarification and legislative action by the tax administration is required. Details about service providers’ software systems and the government infrastructure are expected to be finalised by mid-2019.
Until the implementation of the new reporting framework whereby invoice data will be reported in real-time at the same time as the invoice is issued, AADE is working on the alternative that invoice data will be reported on a regular basis by the issuer only, and not the buyer, which should minimise the overall reporting workload and ensure uniqueness of data. The buyer will be able to amend the relevant reporting field on TaxisNet where there is insufficient invoice data from the supplier.
On 29 October 2018 the Government published a Bill to transpose the Directive 2014/55/EU on e-invoicing in public procurement; it however still needs to be approved. The Bill makes e-invoicing mandatory for both the supplier and the buyer/government in public procurement scenarios as of 1 April 2019.
AADE has clearly stated that mandatory e-invoicing would be incomplete without some type of combined transactional reporting; data should be created once and not several times as is currently the case. Therefore, we expect a type of “clearance” e-invoicing model in Greece, however at this stage it’s still too early to categorise the reform as being similar to Italy (“real” clearance e-invoicing) or more like Hungary (real-time reporting as soon as the invoice has been issued). Clearly, Greece is in line with the EU paradigm shift towards increased governmental control over transactional data and recognises the benefits of tighter tax compliance and in taking steps to close its tax gap.
Even if the new measures aren’t particularly welcomed by many individuals in Greece – much in the spirit of a well-held opposition against EU austerity measures which have led to riots and social unrest in the past – these new measures are well positioned to provide the Greek tax administration and government with an opportunity for structural change. The use of technology will enable more effective tax controls and enforcement as well as a more efficient tax environment for business, leading to a positive knock-on effect for future restructuring and rebuilding of the Greek economy.
Find out how Sovos can keep companies compliant with e-invoicing regulations in Greece and around the world.